X16 Installation Guide
- 58 -
Issue 2
Functions
CO Line Cadence and Status Table
Speaker
Unlit: Speaker or Intercom Link Idle
Fast: Receiving incoming call
Lit: Talking with the Digital Telephone Endpoint
Slow: In headset mode
Enter/VM
Unlit: No New messages
Fast: New Message in VM
Lit: No answer forward active – unanswered calls will be
forwarded to VM
Slow: New Telephone Company Line Message Waiting
Mute
Unlit: Inactive – phone is not muted
Lit: Active – phone is muted
All Page
On Flexible Button
Unlit: Inactive – Not currently paging
Lit (rapid flash): Making or receiving a page
DND
On Flexible Button
Unlit: Inactive – DND function is off
Lit (solid): Active – DND function is active
Record
On Flexible Button
Unlit: Inactive – Not recording call
Lit (rapid flash): Active – Recording call
Headset
On Flexible Button
Unlit: Headset function is off
Lit: Headset function is on
DSS/BLF
On Flexible Button
Unlit: The extension programmed on the button is idle
Lit: The extension programmed on the button is busy
Slow: The extension programmed on the button is in DND
Ringing Cadence
CO Ring
Synchronized with CO Ringing
Intercom Ringing
0.25 sec on, 0.25 sec off, 0.25 sec on, 1.25 sec off repeating.
Transfer/Recall
1 sec on, 1 sec off, repeating
Hold Reminder
1100Hz, 0.05 sec on/off, 4 beeps
Privacy Release
1100Hz, 0.2 sec on/off, 1 beep
Privacy Recover
1100Hz, 0.2 sec on/off, 2 beep
Call Waiting Beep
500Hz, 0.2 sec on/off, 2 beeps
Single/All Page
600Hz, 1.0 sec on, 1 beep
Confirmation Beep
1100Hz, 0.5 sec on, 1 beep
Warning Beep
1100Hz, 0.05 sec on/off, 3 beeps
Cable Specifications
Category
AWG
Length
Impedance
CAT5e
24
600 feet
20 Ohms
Issue 2
-
15 -
Sys
tem
Configuration
Step 3 – Telephone Endpoint Connection
The
X16
comes standard with four RJ11 extension ports. Each port supports
up to 4 proprietary digital telephone endpoints, for a total of sixteen (16)
endpoints. Each port on the system will support up to 600 feet of cable.
In a Loop wiring or serial cable topology 600 feet is calculated by adding
the distance of the initial run plus the distance between each telephone.
Cable A to telephone 1 + (distance between telephone1 & telephone 2) +
(distance between telephone 2 & telephone 3) + (distance between
telephone 3 & telephone 4) <= 600 feet.
