M A - T 6 / M A - T 1 2 S P E C T R O P H O T O M E T E R
32
Cleaning the Instrument
Your instrument requires very little maintenance to achieve years of reliable operation. However,
to protect your investment and maintain reading accuracy, a few simple-cleaning procedures
should be performed from time to time.
General Cleaning
The exterior of the instrument may be wiped clean with a cloth dampened in water or mild
cleaner.
NOTE: DO NOT use any solvents to the clean the instrument, this will cause damage to the
cover and internal electronic components.
Cleaning the Calibration Reference
The white tile and effects tile in the calibration reference should be cleaned using a mild soap and
warm water solution, thoroughly rinsed with warm water, and wiped dry with a clean, lint-free
cloth. You must let the
reference dry completely before taking a calibration measurement.
Replacing the Battery Pack
NOTE:
If the battery pack is ever dropped, check it for damage and replace if necessary.
Use the rechargeable Li-ion batteries provided (X-
Rite P/N SE15
-40 / E-One Moli Energy Corp
Model MCR-1821J/1-H); other types may burst causing personal injury.
1.
Carefully turn the instrument over and slide open the latch (1) that secures the battery pack
access cover. Open the access cover.
1.
Press in on the battery pack holding latch (2) in the battery compartment to allow the battery
to pop up.
2.
Turn the instrument over to allow the old battery back to slide out.
3.
Slide the new battery pack (3) into the instrument with the battery contacts facing down until
the battery is positioned below the holding latch (2).
4.
Close the access cover by pressing down until it locks into position.
(1)
(3)
(2)
Summary of Contents for MA-T12
Page 1: ...MA T6 MA T12 Spectrophotometer User Guide ...
Page 2: ......
