X-Rite MA-T12, User Manual

Page: 24 / 36

M A - T 6 / M A - T 1 2 S P E C T R O P H O T O M E T E R
22
Additional Tips
• Measurements performed on a surface with a curve can cause measurement errors
especially at the near specular angles (±15° and 25°). Measurements should be made on
the flattest part of a sample whenever possible.
• Hold the instrument firmly by the front and top during a measurement.
Basic Measurement
The Basic Measure ment mode is used to take quick measurements with no standard comparison.
Measurement data can be viewed and delete as needed. The measurement sequence is displayed
at the bottom of the screen to help you track your progress for a sample.
The following procedures explain the steps for operating the instrument in Basic Measure ment
mode.
1.
From the main screen, tap Basic Measurement .
2.
Tap the Plus icon at the top of the screen to start a new measurement.
3.
The instrument goes into targeting mode. Position the instrument on the first sample area to
measure as explained in Instrument Positioning.
4.
Hold the instrument steady and press a Measure button or tap the screen to initiate a
measurement. The measurement will automatically occur if Auto Measurements is activated.
Continue to hold the instrument steady until “Calculating” appears in the screen.
NOTES :
• If an error occurs after the measurement, tap OK on the screen and try measuring again.
• The current measurement sequence can be canceled at any time by tapping the Cancel
icon at the top left of the screen and then tapping yes .
Tap for new measurement