M A - T 6 / M A - T 1 2 S P E C T R O P H O T O M E T E R
29
Using Job Templates
Job templates are created using a software application and then downloaded to the instrument.
Job templates can contain multiple jobs which each include standards, checkpoint titles, and
tolerances. A typical job would display a list of checkpoints (measurements) required for the
selected job. After all checkpoints are measured, the job data is uploaded to the software
application for analysis.
Refer to the software application for specific information on creating job templates, downloading
job templates, and uploading job data.
Running a Job from a Job Template
1.
Send job template from Nucleos
Auto
QC
to the instrument.
2.
From the main screen, tap the job template from the list.
3.
Jobs that are available in the selected job template are displayed in the Open list. Tap the job
that you will be running.
4.
Measurement checkpoint information is displayed for the selected job. In this example, the
hood and the bumper of the car are to be measured. Tap
Hood
in the checkpoint list to place
the instrument into targeting mode.
5.
Position the instrument on the checkpoint to measure as explained in Instrument Positioning.
Summary of Contents for MA-T12
Page 1: ...MA T6 MA T12 Spectrophotometer User Guide ...
Page 2: ......
