17
X-Oven.2 / January 2017
Image 13
- Installation with Exhaust pipe connector and stainless steel pipe
The Manufacturer is not responsible for the installations, use and maintenance
of the extractor hood, exhaust pipe and for the setup of the connecting pipe.
The Manufacturer is relieved from any responsibility in the case that the
Customer is not observant of the laws and regulations of the country where
the product is installed and used.
OUTDOOR INSTALLATION
The installation of the X-Oven.2 outdoor is possible with the use of the
optional accessories
Exhaust pipe connector and Outdoor pipe
, visit
and see
Image 14
.
The mentioned accessories allow to recreate the draft effect generated by the
extractor hood indoor and consequently guarantee the same performances
and proper use also outdoor.
The Exhaust pipe connector allows to connect the product directly to an ex-
haust pipe with a
10 cm diameter pipe
(not supplied) and discharge the
combustion fumes through the exhaust pipe into the open-air, see
Image 13
.
