X-lander BOOSTER2 User Manual Download Page 26

Page: 26 / 54

NOTE: Make sure the connection is secure by pulling on the drawbar.
d) Thread the safety strap around the bike frame tube and hook the snap hook into the

drawbar handle. Make sure the safety strap does not catch on the spokes or disc brakes.

⚠

WARNING:

Make sure that the axle link is correctly secured in the

drawbar head. If it is not attached correctly, the trailer may come loose

while driving, which can lead to accidents with life-threatening injuries.

⚠

WARNING:

Never drive without securing the drawbar with the

safety strap! If the trailer comes loose, it will still be connected to the

bicycle. Failure to observe this can lead to accidents with lifethreatening

injuries.

MOUNTING THE BUGGY WHEELS (CONFIGURATION - PUSHCHAIR)

If the bicycle trailer has a drawbar or jogging set fitted, first remove these components

and insert the pins of the yellow fixing clamps back into the holes provided. Make sure

that the fixing clamps are closed. The clamp is securely closed as soon as you hear

a loud click.
TIP: To familiarise yourself with the assembly, we recommend that you first lift the front

of the trailer, tilt it back and rest it on the handle. Make sure the surface underneath the

trailer is clean and smooth so as not to dirty or damage the textile cover. Later, once you

are familiar with the assembly, simply lift the front of the trailer slightly for this work.
a) Lift the front of the trailer or tilt it backwards.

b) Insert the stroller wheel into the socket as far as possible until you hear and feel it

snap into place.

c) To remove the stroller wheel, press the yellow button and pull out the stroller wheel.

MOUNTING THE JOGGER WHEEL (CONFIGURATION - JOGGER)

If a drawbar or buggy wheels are fitted to the bike trailer, these components must first

be removed. The jogger set-up consists of two arms and a jogger wheel and a safety

strap. The arms are mounted in a similar way to the drawbar. The left arm is inserted into

the drawbar socket and the right arm is inserted into a socket of identical design on the

right side.
a) Lift the front of the trailer or tilt it backwards. Unfasten the yellow fixing clamps on

both sides and remove them.

b) Slide the front wheel arms into the mounting slots.

c) Insert the pins of the yellow mounting clamps into the holes provided.

d) Lock the mounting clamps until you hear a click.
NOTE: Make sure that the fixing clamps are closed. The clamp is securely closed as soon

as you hear a loud click.
e) Next, insert the jogger wheel into the wheel arm slots. Ensure that the wheel lock

washers are in the correct mounting holes.
TIP: If you have trouble getting the lock washers in place loosen or unscrew the nut

located on the front wheel axle. (Be careful not to lose the spring located under the nut.).
f) Turn the axle nut and close the quick release.
TIP: If during use you find that the wheelchair does not keep a straight track you can correct

this using the yellow knobs underneath the front wheel fork.