Tel: +49 (0) 8641 6948 - 60 | xgloo.com | [email protected]
19
Opening and securing the Entrance Wall
The Entrance Wall is zipped on as described on page
18. To hold the Entrance Wall open, open the zipper in
the middle of the Wall and gather each side together.
On each side of the Entrance Wall you will find a toggle
on a length of cord. Fasten each side by inserting the
toggle through the loop of cord across from it (a).
Folding down the Walls (b)
To secure a Wall in a half-open / folded position and
prevent it from completely opening, the zipper slider pul-
ler on each side of the Wall can be fixed to the small
velcro strip on the inside of the Roof (c).
Preventing strain/damage to the Wall zippers
If the Walls are exposed to high pressure (if the Event
Tent is set up in an area with high winds for example),
the zipper will bear the strain. This is especially true for
where the zippers are attached at the base of the Roof.
To relieve strain to the zippers and to avoid damage to
the Event Tent or the Walls, you will find straps and bu-
ckles located at the base of each Wall. Connect these
to the webbing loops provided on the Tube ends (d).
Tighten each strap until the tension on the zipper is
relieved (e).
a
b
c
d
e
