Tel: +49 (0) 8641 6948 - 60 | xgloo.com | [email protected]
25
XG SERIES (XG 4-8)
The Event Tent can be easily disassembled into indivi-
dual parts (Roof and Tubes) for repair or replacement.
Re-attaching the new or repaired part is just as easy.
REMOVING THE ROOF
1 Under the Roof at each Tube end you will find two
velcro straps fixing the tent Roof to the Tube. Open
both straps and disconnect them from the nylon
buckles (a).
2 Unhook the plastic toggle from the loop which is lo-
cated at the end of the zipper connecting the Roof
to the Tube end (b) and then unzip the Roof from the
Tube (c). Repeat Steps 1 and 2 on the remaining three
Tubes. The Roof can now be removed.
SEPARATING THE TUBES
1 Remove the Roof as described above.
2 Use an 8mm allen key (included in the repair kit) to
unscrew the bolt in the aluminum tube connector
and then remove the bolt and cap (d). The Tubes
can then then be easily removed by sliding them
out of the channels in the tube connector (e).
RE-ASSEMBLY
To reassemble the Event Tent, simply reverse the disas-
sembly process. Starting at the tube connector, attach
each zipper on the Roof to one of the four Tubes. Next,
connect each toggle on the Roof to the corresponding
loop on the Tube ends and then reconnect the velcro
straps on the Roof by first threading them through the
buckles on the Tube ends.
c
d
e
b
a
REPAIR
Find all of our how-to videos at:
xgloo.com/howto