X GLOO ® | Windeckstr. 4 | 83250 Marquartstein | GERMANY
12
3 INFLATE
3.1 Connect the hose to the pump and then insert the
other end of the hose into the valve on one of the
Tubes.
3.2 First inflate two Tubes opposite one another to
form a 180° semicircle (a).
3.3 Next inflate the Tube laying on top of and between
the two inflated Tubes. This Tube will begin to rise
off of the ground (b).
3.4 Now you can inflate the final Tube.
XG 8 ONLY:
When inflating the XG 8 it is recommen-
ded to work with two people. One person lifts the
tube intersection at the middle of the Roof, setting
the fork of the setup support bar directly under one
of the Tubes in the area of the tube intersection (c).
The second person operates the pump, repositio-
ning it as necessary as the Tubes inflate.
3.5 Screw the protective caps closed after inflating the
Tubes to prevent dirt from entering.
3.6 If the Tubes have been inflated correctly, the Event
Tent will stand in a stable and wrinkle-free position.
All four Tubes can now moved by hand to the final
position.
3.7 Finally, anchor the Event Tent using one or more of
the methods as described on pages 14-17.
3.2: Inflate two Tubes opposite one another
3.3: The third tube will begin to rise off of the
ground when inflated
3.4: Using the setup support bar to help lift the
roof of an XG 8 model
a
b
c
Find all of our how-to videos at:
xgloo.com/howto
