X GLOO ® | Windeckstr. 4 | 83250 Marquartstein | GERMANY
16
PROPER USE OF THE
ANCHORING LINES/WEBBING
1 Push the loop end of one anchoring line/webbing
through one of the shoulder loops on the Event Tent
(a).
2 Push the tail of the anchoring line through the loop
end and pull it it through until the anchor line is tight
around the shoulder loop (b).
3 Secure the tent by connecting the anchoring line to
a tent peg positioned approximately 2 meters from
the base of the Tube. Tighten the line using the line
tensioner (c).
4 Repeat on the other three Tubes.
TENT STAKES
Roof
Anchoring
Line/Webbing
Zipper Rain Cover
Wall
Shoulder Loops
TENT STAKE PLACEMENT KEY
: Anchoring Lines/Webbing
: inner Tube
: outer Tube
: Walls
a
b
c
tension
release
for the XC 3 / XG 4
Tent Stakes
Qty.
Use
300 mm L
16 pc.
inner Tube + Walls
500 mm L
4 pc.
outer Tube
Speed Cinch
4 pc.
Anchoring Lines
for the XG 5 / XG 6
Tent Stakes
Qty.
Use
300 mm L
16 pc.
inner Tube + Walls
500 mm L
8 pc.
outer Tube +
inner Tube
Speed Cinch
4 pc.
Anchoring Lines
für XG 8
Tent Stakes
Qty.
Use
300 mm L
16 pc.
Walls
500 mm L
8 pc.
inner Tube + Walls
800 mm L
4 pc.
outer Tube
Speed Cinch
4 pc.
Anchoring Webbing
ANCHORING WITH THE
ANCHORING SET/TENT STAKES
CAUTION:
The number of anchors required
depends on the size of the tent and the wind condi-
tions. See our wind certificate at xgloo.com
