Tel: +49 (0) 8641 6948 - 60 | xgloo.com | [email protected]
21
LED LIGHTING KIT
Hanging the LED Lighting Kit in your inflatable X GLOO
Event Tent
1 It is easiest to install the LED Lighting Kit during the
setup of your Event Tent, just after inflating three of
the four Tubes. Take the long end of webbing con-
nected to the LED light and loop it above the tube
intersection (a). Connect it to the buckle on the ot-
her side of the light. Tighten the strap so the LED
light is held snugly against the Tubes.
2 Next, extend the four toggles on the LED lighting
mount and connect them to the loops on the inside
of the Tubes of the Event Tent (b).
3 Tuck the cable underneath the Roof so that it fol-
lows one Tube all the way to the ground (c). The
fourth Tube can now be inflated.
4 The transformer and dimmer controller can be safe-
ly stored on the ground.
Remove the LED Lighting Kit from your Event Tent using
the steps above in reverse order. Ensure that the LED
light does not hit the ground when deflating your Event
Tent!
a
b
c
Find all of our how-to videos at:
xgloo.com/howto
