Würth AWS 18-115 P COMPACT, Translation Of The Original Operating Instructions

Page: 31 / 289

31
vapours may be emitted. Provide for fresh air and
seek medical help in case of complaints. The
vapours can irritate the respiratory system.
˟
Use the battery only in conjunction with your Würth
power tool. This measure alone protects the battery
against dangerous overload.
˟
Use only original Würth batteries with the voltage
listed on the nameplate of your power tool. When
using other batteries, e. g. imitations, reconditioned
batteries or other brands, there is danger of injury
as well as property damage through exploding
batteries.
˟ Use only original Würth accessories.
5HVLGXDO5LVNV
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual
risk factors. The operator should pay particular and
additional attention to these points in order to reduce
the risk of serious personal injury.
˟ ,QMXU\ FDXVHG E\ WKURZQR̄ SDUWLFOHV ² 0HWDO
or abrasive particles may enter the eyes and
cause severe permanent damage. Wear goggles
approved for grinding operations whenever you
use the product.
˟
Injury caused by vibration – Limit exposure and
take regular breaks.
˟ Injury caused by dust – Wear appropriate dust
FRQWURO PDVN ZLWK ÀOWHUV VXLWDEOH IRU SURWHFWLQJ
against particles from the material being worked
on and abrasive particles from the grinding disc.
Do not eat, drink, or smoke in the work area. Ensure
adequate ventilation.
˟
Injury from contact with the grinding disc – The
disc and workpiece will become hot during use.
Wear gloves when changing discs or touching
workpiece. Keep hands away from the grinding
area at all times. Clamp the workpiece whenever
possible.
˟ Injury caused by noise – Prolonged exposure to
noise will increase the risk of hearing damage, and
WKHH̄HFWVDUHFXPXODWLYH:KHQXVLQJSRZHUWRROV
for any extended period of time, wear hearing
protection.
7RRO6SHFLÀFDWLRQV
Cordless Angle
Grinder AWS
18-125 P
COMPACT
AWS
18-115 P
COMPACT
Article number 5701 402
00X
5701 420
00X
Voltage 18 V/DC 18 V/DC
Rated speed 11000
min
-1
11000
min
-1
Spindle thread M14 M14
Grinding wheel capacity 125 mm 115 mm
Thickness of grinding
wheel 6 mm 6 mm
Inner diameter of wheel 22.2 mm 22.2 mm
Weight - not incl. battery
pack 2 kg 2 kg
Weight (According
to EPTA procedure
01/2003) 2.7 kg 2.7 kg
Ambient operating
temperature for the tool
and battery pack 0 - 40°C 0 - 40°C
Ambient storage
temperature for the tool
and battery pack 0 - 27°C 0 - 27°C
Recommended ambient
charging temperature 5 - 40°C 5 - 40°C
Recommended battery
type LI 18V/4
Ah BASIC
LI 18V/4
Ah BASIC
Recommended charger ALG 18/4
BASIC
ALG 18/4
BASIC
Know Your Product
See page 3.
1. Spindle lock button
2. Handle, insulated gripping surface