wtw Turb 430 IR/T, Operating Manual

Page: 19 / 72

Turb 430 IR/T Operation
19 ba75507e04 06/2009
4 Operation
4.1 Switching on the meter
Switching on Press the <ON/OFF> key.
The Start menu appears for 30 seconds.
The status line indicates the meter designation and the version number
of the software.
Note
If the meter is already switched on, go to the Start menu by pressing
the <ESC> key one or several times as necessary.
After a few seconds the meter automatically switches to the measuring
mode.
Switching off Press the <ON/OFF> key.
Automatic switchoff
function
The meter has an automatic switch-off function in order to save the
batteries or accumulator pack (see section 4.4). The automatic
switchoff switches off the meter if no key is pressed for an adjustable
period.
The automatic switchoff is not active

if the power is supplied by the power pack (optional),

if the power is supplied by the LabStation (optional),

if the Timer function is running.
Turbidity
i
Turb 430 IR V 0.24
Start
i
Insert sample
i
Press and hold <START>
i
Align sample
Turbidity