wtw Turb 430 IR/T, Operating Manual

Page: 13 / 72

Turb 430 IR/T Commissioning
13 ba75507e05 07/2016
3 Commissioning
3.1 Scope of delivery

Handheld turbidimeter Turb 430 IR or Turb 430 T

4 batteries, 1.5 V type AA (in the battery compartment)

Optional: Accumulator pack and power pack with Euro plug
and exchange plugs for USA, UK, and Australia

Optional: LabStation

5 empty cells 28 mm
with label to mark the cell

AMCO
®
-Clear turbidity standard

Microfiber cloth to clean the meter

Compact operating manual and short operating manual

CD-ROM with detailed operating manual
Note
The optional parts of the scope of delivery are available as accessories
(see section 8.1).
3.2 Power supply
You can operate the meter either with batteries, accumulator pack or a
power pack. The power pack supplies the meter with low voltage
(9 V DC). At the same time, the accumulator pack is charged. The
accumulator pack is charged even while the meter is switched off.
The LoBat display indicator appears when the batteries or accumulator
pack are nearly discharged.
Charging time of the
accumulator pack
approx. 36 hours.
CAUTION
The line voltage at the operating site must lie within the input
voltage range of the original power pack (
SEE
chapter 7 T
ECHNICAL
DATA
).
CAUTION
Use original power packs only (see chapter 7 T
ECHNICAL DATA
).