![wtw TecnoLine LF 171 Operating Manual Download Page 103](http://html1.mh-extra.com/html/wtw/tecnoline-lf-171/tecnoline-lf-171_operating-manual_1000707103.webp)
Reading mode
107
"Reading" of parameterization/configuration: Reading mode
The code number is not necessary in order to read the parameterization.
After input of the access order
•
‚
•
Keep DOWN key depressed
‚
Press ENTER key
the display shows:
+
With
to PARAMETER (reading mode).
Look at the parameterization with
and
.
Changing of settings is impossible!
With
to looking at the configuration.
With
M
to measurement.
Look at the configuration
with
and
.
Changing of settings is impossible!
With
M
to measurement.
The parameterization can be displayed in turn by repeatedly pressing
but it cannot be altered.
The sequence is according to that of the active parameterization. Points which were not activated
(e. g. LL LF) are not displayed during the reading.
Press the rocker switch to
M
and go back to measurement.
Summary of Contents for TecnoLine LF 171
Page 2: ...2...
Page 54: ...Technische Daten 54 EMV Zertifikat...
Page 64: ...68...
Page 116: ...Technical data 120 EMC certificate...