wtw Oxi 3310, Operating Manual

Page: 39 / 62

Oxi 3310 Operation
39 ba75804e06 03/2012
Terminating the
automatic storage
function prematurely
Proceed as follows to switch off the automatic storage function before
the adjusted storage duration has expired:
4.5.3 Displaying and editing the measurement data storage
The contents of the manual or automatic measurement data storage
can be shown on the display.
Each of the measurement data memories has a function to erase the
entire contents.
The contents of the manual or automatic measurement data storage
can be shown on the display and output to the interface.
Editing the data storage The storage is edited in the menu, Storage & config/ Data storage. To
open the Storage & config menu, press the <F1
_
>[Menu] key in the
measured value display. Open the manual or automatic storage directly
with the <RCL> or <RCL_> key.
Note
The settings are explained here using the manual storage as an
example. The same settings and functions are available for the
automatic storage.
1 Press the <STO_> key.
The following window appears.
2 Using <
▲
><
▼
>, select Yes and confirm with <ENTER>.
The measuring instrument switches to the measured value
display.
The automatic storage function is terminated.
Stop automatic storage?
Yes
No
Warning
22.09.2008
08:00
Back