wtw Oxi 3310, Operating Manual

Page: 24 / 62

Operation Oxi 3310
24 ba75804e06 03/2012
4.3.2 Data storage
This menu contains all functions to display, edit and erase stored
measured values and calibration records.
Note
Detailed information on the storage functions of the Oxi 3310 is given
in section 4.5.
4.3.3 Automatic Stability control
The function, automatic Stability control (AutoRead) continually checks
the stability of the measurement signal. The stability has a considerable
impact on the reproducibility of measured values.
You can activate or switch off the automatic Stability control function
(see section 4.4.3).
The measured parameter flashes on the display

as soon as the measured value is outside the stability range

if you switch over between the measured parameters with <M>.

if the automatic Stability control is switched off.
System / Interface /
Output format ASCII
CSV Output format for data
transmission
For details, see section 4.6
System
/
Interface
/
Decimal separator
Dot (xx.x)
Comma (xx,x) Decimal separator
System / Interface /
Output header Output of a header for Output
format: CSV
System / Clock Time
Date
Date format Settings of time and date.
For details, see section 4.2.4
System / Service
information Hardware version and software
version of the meter are
displayed.
System / Reset - Resets the system settings to
the default values.
For details, see section 4.7.2
Menu item Setting Description