wtw Oxi 3310, Operating Manual

Page: 36 / 62

Operation Oxi 3310
36 ba75804e06 03/2012
4.5.1 Manual storage
You can transmit a measurement dataset to the data storage as
follows.
The dataset is at the same time output to the interface:
If the storage is full The following window appears if all 200 storage locations are occupied:
You have the following options:

To erase the entire storage, confirm Yes.

To cancel the storage process and switch to the measured value
display, confirm No. Then you can e.g. transmit the stored data to a
PC (see section 4.5.3) and subsequently erase the storage (see
section 4.5.4).
1 Press the <STO> key shortly.
The menu for manual storage appears.
2 If necessary, change and confirm the ID number (1 ... 10000)
with <
▲
><
▼
> and <ENTER>.
The dataset is stored. The meter switches to the measured
value display.
30.10.2008 11:24:16
pH 7.000 24.8 °C AR +++
ID number: 1
Continue
Manual data storage
4
From
200
22.11.2010
08:00
Back
Data storage full. Erase?
Yes
No
Warning
22.09.2008
08:00
Back