108
Advanced Operation
mand. If no beep was heard, the command failed.
Changing the channel remotely
The KG-1000G Plus will allow the channel of the non-active area to be changed re-
motely, provided the new channel is not in the same band as the active area frequency.
For example, if the active area frequency is UHF, the frequency of the new channel sent
remotely must be VHF.
To change channels remotely, first refer to the Activating the Remote Control sub-sec-
tion (page 106) to activate remote control mode.
With remote control mode successfully activated, hold the controlling radio’s PTT,
press 0 + 2 + Channel number (total of 3 digits) and then release the PTT. For example,
to change to channel 22, enter: 0 2 022.
A beep should be heard on the controlling radio confirming that the command was
received. The controlled radio will reboot and adjust the frequency to match the com-
mand. If no beep was heard, the command failed.
