97
Advanced Operation
Advanced Operation
To transmit the radio ID, press [MENU] + [3] + [7]. The screen will display: DTMF-
ID (page 72). Press [MENU], choose whether to transmit the ID at the beginning of
transmission (BOT), end of transmission (EOT), or both beginning and end (BOT).
Press [MENU] to confirm and [EXIT] to return to standby.
You can delay transmission of the radio ID for a specific time using the ID-DLY menu
option (page 73). This delay time can be set to one of 30 levels in 100ms increments.
Calling a specific radio using an ID
The KG-1000G Plus also supports the ability to call another radio directly, using its
Radio ID. To enable this function, you must activate and configure all radios in your
fleet to transmit the Radio ID (see Sending a Radio ID on page 96) and select either
the QT+DTMF or QT*DTMF filter option in SP-MUTE (page 71).
To call a specific radio, you must know its radio ID. After pressing PTT and allowing
your radio time to transmit its radio ID, use the keypad on the hand mic to enter the
radio ID that you are calling. If the radio ID is less than six characters, enter a # after
the ID.
