46
Basic Operation
Simultaneous Scanning on the A and B Areas
The A and B areas can perform a scan at the same time. To do this, press [SCAN] to
activate the scan on the A Area , press [AREA] to go to the B area, then press [SCAN]
to activate the scan on B area. Both areas should scan simultaneously.
▪
When the PTT is pressed to transmit on the Primary Frequency Area during a
scan, the Secondary area will stop scanning temporarily. When the PTT is released
at the end of transmission, scanning on the Secondary area will resume.
▪
During a scan, pressing the [SCAN] key will only stop the scan on the currently
selected Area.
Important!
While scanning the Secondary frequency area, some settings on the Prima-
ry frequency area will be prohibited. These include Add Channel (CH-
ADD), Scan Mode (SCANMODE), Delete Channel (CH-DEL), Chan-
nel Name (CH-NAME) and Repeater Mode Settings (RPT-MODE).
