Worldwide Construction And Forestry Division 380GLC, Operator'S Manual

Page: 69 / 288

Operation—Operator's Station
OUT4001,0000741 -19-19FEB18-2/2
OUT4001,0000742 -19-13AUG14-1/1
1. Press blower speed switch while air conditioner is OFF
to set blower speed to AUTO mode. Rotate blower
speed switch either way to cancel AUTO mode and set
the blower speed manually to desired speed setting.
2. Turn the air conditioner ON from the monitor menu.
See Main Menu—Air Conditioner. (Section 2-2.)
3. Rotate temperature control/mode switch to reach
operator's preferred cab degree cold air setting.
Temperature setting will change on the air conditioner
display on the monitor as the switch is rotated either
way.
4. Press temperature control/mode switch to toggle
between different air vent options. The air conditioner
display on the monitor will show the different settings
each time the switch is pressed. There are four
different settings:
NOTE: If lower front window becomes cloudy,
defroster vents should be closed.
- Air flows out of front vent and the defroster vents.
- Air flows out of front, rear, and the defroster vents.
- Air flows out of front, rear, foot, and the defroster
vents.
- Air flows out of foot vents.
Selecting Display Between Celsius and
Fahrenheit
The cab temperature (1) is always shown in the air
conditioner display on the monitor. Temperature display
can be changed between degrees Celsius (°C) and
Fahrenheit (°F) using the Unit Selection menu. For
more information, see Main Menu—Setting Menu—Unit
Selection. (Section 2-2.)
Degrees Celsius (°C) can be set in a range from
18°C—32°C.
Degrees Fahrenheit (°F) can be set in a range from
63°F—91°F.
1— Cab Temperature
TX1087258A
—UN—24JAN1
1
Air Conditioner Display on the Monitor
2-1-10 092221
PN=69