Worldwide Construction And Forestry Division 380GLC, Operator'S Manual

Page: 149 / 288

Maintenance—As Required
ER79617,0000A84 -19-07APR16-1/1
ER79617,0000D71 -19-27DEC10-1/1
ER79617,0000D72 -19-24JAN11-1/1
Remove and Clean Fuel Tank Inlet Screen
Clean fuel tank inlet screen (1) using solvent or diesel
fuel to remove any debris.
Replace screen if damaged.
1— Fuel Tank Inlet Screen
T135186
—UN—06NOV00
Fuel Tank Inlet Screen
Check Windshield Washer Fluid Level
1. On left side of machine, open service door to access
windshield washer fluid bottle (1).
NOTE: During winter season, use all-season windshield
washer fluid which will not freeze.
2. Check fluid level in windshield washer fluid bottle and
refill as required.
1— Windshield Washer Fluid
Bottle
TX1086247A
—UN—27DEC10
Windshield Washer Fluid Bottle
Check and Clean Air Cleaner Dust Unloader
Valve
IMPORTANT: Avoid machine damage. A missing,
damaged, or hardened air cleaner dust unloader
valve (1) will make the dust cup precleaner
ineffective, causing very short element life. Valve
should suck closed above 1/3 engine speed.
NOTE: If operating in high dust conditions, squeeze dust
valve every 2 hours of operation to release dust.
1. On left side of machine, open rear side shield to
access air cleaner dust unloader valve (1).
2. Squeeze air cleaner dust unloader valve to remove
dust from the air cleaner.
3. Check condition of dust unloader valve. Replace if
hardened or damaged.
TX1086248A
—UN—28DEC10
Dust Unloader Valve
1— Dust Unloader Valve
3-3-1 092221
PN=149