14. MAIN MENU (SETTINGS)
14.2 Range
RANGE submenu allows user to set the upper and lower temperature limit for the infrared camera. The colors
of the selected color pale e are distributed lineary between MAX and MIN values. Any area with measured
temperatures out of these limits will be displayd with the max (or min) color of current pale e, or with the color
of alarm if the alarm is set and the area met the condi ons.
RANGE menu consist of following items:
MAX - Manual temperature range maximum. Has to be at least 10°C above MIN. Maximal value of MAX
can be 50°C.
MIN - Manual temperature range minimum. Has to be at least 10°C below MAX. Minimal value of MIN can
be 0°C.
Figure 14.2 – Range se ngs
Changes are previewed in real me and can be confirmed to be kept by pressing ENTER key or canceled by
pressing BACKSPACE key, in which case the last value set is maintained.
14.3 Func ons
FUNCTIONS submenu allows you to manually set which camera is the primary and adjust se ngs for the black
body calibra on.
MAIN CAMERA - toggle which camera (thermal or visible) is displayed as the primary (main) screen and
which is in the secondary (preview) screen.
FORCE CALIBRATION - recalibrate the measured temperature. The calibra on is based on the temperature
measured inside of the BLACK BODY ROI. The posi on of the BLACK BODY ROI must be set correctly in the
thermal picture.
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 1.2.0 EN, 28
th
May, 2020
All pictures are only for illustra on.
Real values may vary.
33
