Woodward DSLC, Installation And Operation Manual, Page: 42 / 114

DSLC Digital Synchronizer and Load Control Manual 02007
36 Woodward
NOTE
The calibration items may require fine tuning during installation.
Menu 7—Generator Electrical Parameters
1.
Active Power (P) is the generator KW load.
2.
Apparent Power (S) is the generator kVA load.
3.
Reactive Power (Q) is the generator kVAR load.
4.
Power Factor (PF) is the average of the power factors on each phase of
the generator.
5.
Phase A (Volts) is the voltage on the generator A phase.
6.
Phase A (Amperes) is the amperes on the generator A phase.
7.
Phase A PF is the power factor on the generator A phase.
8.
Phase B (Volts) is the voltage on the generator B phase.
9.
Phase B (Amperes) is the amperes on the generator B phase.
10.
Phase B PF is the power factor on the generator B phase.
11.
Phase C (Volts) is the voltage on the generator C phase.
12.
Phase C (Amperes) is the amperes on the generator C phase.
13.
Phase C PF is the power factor on the generator C phase.
14.
Gen Frequency is the frequency of the generator.
15.
Bus Frequency is the frequency of the bus.
16.
Bus Voltage is the voltage on the bus A phase.
17.
Synchroscope is the phase difference between the generator and bus A
phase voltage wave forms.
18.
Slip Frequency is the difference in frequency between the generator and
bus A phase voltage wave forms.
19.
System Load is the current system (load sharing) load.
20.
System PF is the current average system power factor.
Menu 8—Control Status Monitor
1.
Synchronizer Mode is the current operating mode of the synchronizer.
2.
Load Control Mode is the current operating mode of the load control.
3.
Load Reference is the current load reference value.