DSLC Digital Synchronizer and Load Control
Manual 02007
22
Woodward
9
Selects Menu 9.
0
Selects Menu 0.
Figure 3-1. Hand Held Programmer Functions
The DSLC control set points or adjustments are arranged in ten menus. You
access these menus with the 1, 2, 3, 4, 5, 6, 7, 8, 9, and 0 (zero) keys. Pressing
the appropriate key selects the first item on each menu. To step through the
menu, use the “Up Arrow” and “Down Arrow” keys. The “Down Arrow” key
advances through the menu and the “Up Arrow” key moves backward through
the menu. The menus are continuous; that is, pressing the “Down Arrow” key at
the last menu item takes the menu to the first item, or pressing the “Up Arrow”
key at the beginning of the menu takes the menu to the last item.
To adjust a set point, use the “Turtle Up” or the “Rabbit Up” keys to increase the
value, and the “Turtle Down” or “Rabbit Down” keys to decrease the value. The
“Rabbit Up” and “Rabbit Down” keys will make the rate of change faster than the
“Turtle Up” and “Turtle Down” keys. This is useful during initial setup where a
value may need to be changed significantly.
When a monitor set point is selected, the control will update the selected value
automatically once a second.