Woodward 505HT, Installation And Operation Manual

Page: 158 / 199

Manual 35116 505HT for Pelton Turbines
Woodward 156
Event ID Description Explanation
35
Remote Level Signal Fail A given analog input channel is being used for this
function and its current falls below 2mA or goes above
22mA
36 Remote Fault #1 Discrete Input configured for this function closes (if an
inverted input is used it has to be opened)
37 Remote Fault #2 Discrete Input configured for this function closes (if an
inverted input is used it has to be opened)
38 Remote Fault #3 Discrete Input configured for this function closes (if an
inverted input is used it has to be opened)
39 Remote Fault #4 Discrete Input configured for this function closes (if an
inverted input is used it has to be opened)
40 Remote Fault #5 Discrete Input configured for this function closes (if an
inverted input is used it has to be opened)
41 Remote Fault #6 Discrete Input configured for this function closes (if an
inverted input is used it has to be opened)
42 Nozzle 1 Signal Fault A given analog input channel is being used for this
function and its current falls below 2mA or goes above
22mA
43 Nozzle 2 Signal Fault A given analog input channel is being used for this
function and its current falls below 2mA or goes above
22mA
44
Nozzle 3 Signal Fault A given analog input channel is being used for this
function and its current falls below 2mA or goes above
22mA
45 Nozzle 4 Signal Fault A given analog input channel is being used for this
function and its current falls below 2mA or goes above
22mA
46 Nozzle 5 Signal Fault A given analog input channel is being used for this
function and its current falls below 2mA or goes above
22mA
47
Nozzle 6 Signal Fault A given analog input channel is being used for this
function and its current falls below 2mA or goes above
22mA
48 Major Nozzle1 Mismatch Nozzle #1 (if used) does not match within the “Major
Mismatch Window” for more than the “Major Mismatch
Delay” time
49 Major Nozzle2 Mismatch Nozzle #2 (if used) does not match within the “Major
Mismatch Window” for more than the “Major Mismatch
Delay” time
50 Major Nozzle3 Mismatch Nozzle #3 (if used) does not match within the “Major
Mismatch Window” for more than the “Major Mismatch
Delay” time
51 Major Nozzle4 Mismatch Nozzle #4 (if used) does not match within the “Major
Mismatch Window” for more than the “Major Mismatch
Delay” time
52 Major Nozzle5 Mismatch Nozzle #5 (if used) does not match within the “Major
Mismatch Window” for more than the “Major Mismatch
Delay” time
Released