![Wood-mizer LT70AC Safety, Setup, Operation & Maintenance Manual Download Page 96](http://html1.mh-extra.com/html/wood-mizer/lt70ac/lt70ac_safety-setup-operation-and-maintenance-manual_994657096.webp)
SAWMILL ALIGNMENT
Blade Wheel Alignment
7
7-22
60HDdoc042607
SAWMILL ALIGNMENT
See Figure 7-21.
To adjust the saw head tilt, use the bolts located at the bottom of the
saw head mast. Loosen the three sets of four retaining plate bolts. To raise the outside of
the saw head, back the stop bolts out, then tighten the adjustment bolts. To lower the
outside of the saw head, loosen the adjustment bolts and tighten the stop bolts. Recheck
the saw head tilt and readjust the bolts as necessary. Retighten the retaining plate bolts.
FIG. 7-21
600011-4a
Stop Bolt
DETAIL OF LOWER TRACK ROLLER ASSEMBLY
Stop Bolt
Adjustment Bolt
Retaining
Plate Bolts
Tighten adjustment
bolts to raise saw head;
Loosen adjustment
bolts to lower saw head
Adjustment Bolt