SAWMILL ALIGNMENT
Blade Guide Horizontal Tilt Adjustment
SAWMILL ALIGNMENT
60HDdoc042607
7-11
7
7.1.10
Blade Guide Horizontal Tilt Adjustment
If the blade guides are tilted in the wrong direction horizontally, the back of the blade may
contact the flange as the roller is spinning down, causing it to push the blade away from
the guide roller. This may result in premature blade cracking.
1.
Remove the blade guide alignment tool from the blade and adjust the blade guide arm
halfway in.
2.
Remove the clip from the blade guide alignment tool. Place the tool against the face of
the outer blade guide roller.
See Figure 7-11.
3.
Measure between the back edge of the blade and the tool at the end closest to the inner
blade guide ("B").
4.
Measure between the back edge of the blade and the other end of the tool ("A").
FIG. 7-11
Horizontal Tilt
Adjustment Screws
A
B
Blade Guide
Alignment Tool
600035b
