Sawmill Operation
Mode Selection
Sawmill Operation
60HD-Rdoc072619
4-24
4
Auto-Up Mode
- This mode
references the current blade height
and allows you to choose
an increment to move the blade
up
. The system will automatically move the saw head up
and stop at the next increment when you push the joystick up. Auto-Up mode is primarily
used to raise the saw head in large increments when preparing to cut a new log or log
that has been turned. This allows the operator to raise the saw head without having to
hold the joystick up, freeing the operator to perform other functions while the saw head is
being raised. The Increment Settings buttons work in the same manner as described in
Auto-Down Mode.
Pattern Mode
- This mode
references the bed surface
and allows you to program up to
six different increments calculated up from the bed. The sixth (top) increment repeats
itself up to the upper limit of the saw head travel. The bottom increment indicates the size
of the remaining cant when the pattern is complete.
All the Auto-Down, Auto-Up and Pattern Modes settings can also be adjusted through the
Auto Mode Settings menu. See
