SAWMILL ASSEMBLY
Power Feed Rope Assembly
2
2-25
15doc121912
SAWMILL ASSEMBLY
2.7
Power Feed Rope Assembly
1.
Before installation of the rope, make sure the power feed motor is properly positioned in relation to the gear
box, as shown in the figure below. If not, turn the motor until it is in the operation position. Secure the motor
to the gear box with the mounting screws.
2.
Mount rubber bumpers with brackets to the bed extensions - See figure below.
f574b
086182-1 Mount
Weldment, Carriage Stop
F05012-21 Cotter Pin
P12165 Rubber
Bushing
M10x30 Bolt
Split Washer 10.2
Flat Washer 10,5
501414-1 Bumper
Mount Bracket
500845 Bed
Extension, Front
500843 Bed
Extension, Rear
