Setup & Operation
Sawmill Setup
Setup & Operation
15doc121912
3-7
3
Recheck the vertical alignment of each blade wheel. Readjust if necessary.
11.
Adjust the spacing between each blade guide roller flange and the back of the blade.
12.
Adjust the horizontal angle of the blade guides.
13.
Adjust the blade deflection (
) and the vertical angle of the blade guides (
HINT: It is best to preliminarily set the blade deflection so that it is 3 - 4 mm, then adjust the blade
guides in the vertical plane and make the final adjustments to the blade deflection. The proper blade
deflection is 6 mm. After adjusting the blade deflection, recheck the vertical alignment of the blade
guides and adjust if necessary.
14.
Install the blade height scale. To do that, first measure the distance from the bottom edge on a down-set
tooth of the blade to the top of the bed rail. Then stick the blade height scale on the mounting bracket so that
it indicates the true distance from the blade to the bed. Adjust the scale if necessary.
FIG. 3-5
150075-1G
To tilt wheel up, tighten top
screw (loosening ealier bottom
screw). To tilt wheel down,
tighten bottom screw (loosening
ealier top screw).
Alignment
Tool
