Safety & General Information
Sawmill Setup
Safety & General Information
15doc121912
1-2
1
1.3
Sawmill Setup
WARNING!
Do not set up the mill on ground with more than a 10 degree
incline. If setup on an incline is necessary, put blocks under one side of the
mill or dig out areas for the legs to keep mill level. Setting up the mill on an
incline could cause it to tip over, resulting in serious personal injury.
WARNING!
Keep all persons out of the path of the saw head while loading
and unloading the sawmill. Failure to do so may result in serious injury or
death.
1.4
Sawmill Operation
IMPORTANT!
The sawmill is intended for sawing wood only.
for log size capacities of the machine.
IMPORTANT!
The operator of the sawmill should get adequate training in
the operation and adjustment of the machine.
DANGER!
Make sure all guards and covers are in place and secured
before operating or towing the sawmill. Failure to do so may result in
serious injury.
DANGER!
Be sure the blade housing and pulley covers are in place and
secured.
DANGER!
Always keep hands away from moving bandsaw blade. Failure
to do so will result in serious injury.
DANGER!
Keep all persons out of the path of moving equipment and logs
when operating sawmill or loading and turning logs. Failure to do so will
result in serious injury.
DANGER!
Maintain a clean and clear path for all necessary movement
around the mill and lumber stacking areas. Failure to do so will result in
serious injury.
DANGER!
Always be sure the blade is disengaged and all persons are out
of the path of the blade before starting the engine or motor. Failure to do so
will result in serious injury.
WARNING!
Always wear eye, ear, respiration, and foot protection when
operating the sawmill. Failure to do so may result in serious injury.
WARNING!
Secure all loose clothing and jewelry before operating the
sawmill. Failure to do so may result in serious injury or death.
WARNING!
Always make sure log is clamped securely before sawing.
Failure to do so may result in serious injury or death.
WARNING!
Use ONLY water or alcohol solution with the water lube
accessory. Never use flammable fuels or liquids. If these types of liquids are
necessary to clean the blade, remove it and clean with a rag. Failure to do
so may result in serious injury or death.
