Maintenance
Safety Devices Inspection
4
4-9
15doc121912
Maintenance
2. Green safety button inspection
Be sure the E-STOP button is released;
Press and hold the green safety button;
Turn on the blade motor. The motor should be started;
Release the safety button. The blade motor should be stopped.
Try to start the motor without pressing the safety button. The blade motor should remain stopped.
Press and hold the green safety button. The blade motor should remain stopped.
3. Inspection of the control circuits with the E-STOP button pressed
Press and hold the green safety button;
Turn on the blade motor;
Press the E-STOP button located on the left side of the control box. The blade motor should be
stopped.
With E-STOP button pressed, try to move the saw head up and down (using the switch and the
Setworks buttons) and forward/backward using the power feed switch. Both systems should not start.
With the E-STOP button pressed, try to start the debarker blade motor and move the debarker arm in
and out. The debarker should not work.
4. Blade cover safety switch and its circuit inspection
Press and hold the green safety button;
Turn on the blade motor;
Open the blade housing cover;
The blade motor should be stopped;
Try to start the motor. The blade motor should remain stopped;
Close the blade housing cover;
The blade motor should remain stopped until it is restarted with the START button.
