Maintenance
Laser guide alignment
4
4-21
IE
doc122719
Maintenance
See figure 4-15.
9.
Check if the laser light is parallel to the straight edge.
10.
Secure both set screws in place when finished.
11.
To move the laser light when slanted, use the laser guide adjustment nut on the laser
guide assembly. Turn the adjustment nut clockwise to move the laser light as shown
below and check the laser light position. Turn the adjustment nut counterclockwise to
move the laser light to the opposite directions as shown below and check the laser light
position.. Make sure the laser light is parallel to the straight edge.
FIG 4-15
Left Set Screw
Right Set Screw
IE0041
Right set screw
Left set screw
