Setup & Operation
Setworks Operation
Setup & Operation
IE
doc122719
3-17
3
See figure 3-2.
The picture below shows the Setworks control panel.
BYPASS MODE
After pressing the BYPASS button, the machine works in manual mode (without the
Setworks option). The distance between the blades is set "manually", using the blue
blade adjustment buttons (blade movement is continuous as long as the button is
engaged).
CAUTION!
The blade adjustment buttons must be released
before the blades reach their travel limits. Damage to the
chain and the gear may result.
SETWORKS RESETTING AND ANALOG SENSOR ADJUSTMENT
1.
Turn the power supply off using main disconnector located on the electric box.
2.
Press simultaneously the MEM1, MEM2, MEM3 buttons and hold them. Turn on the
power supply and wait until "System Reset" message will appear on the display.
3.
Measure distance from the inside edge of the first blade's tooth to the inside edge of the
FIG. 3-2
