Ustawianie i obsługa
Pre-Operation Check
3
3-10
IE
doc122719
Ustawianie i obsługa
do so may result in serious injury.
NOTE:
The feed reverse handle/anti-kickback lever lifts the anti-kickback fingers, shuts
down the blades and reverses the infeed movement. Release the lever and restart the
blades by pressing the START BLADES button on the control box to continue cutting.
5.
Be sure all guards and covers are in place and secured.
DANGER!
Make sure all guards and covers are in place
and secured before operating the Edger. Failure to do so
may result in serious injury.
6.
Also be aware that the blades are spinning whenever the motor is ON. Always turn off the
motor to stop the blade whenever the Edger is not in use and ensure that all parts have
stopped moving before removing any covers or guards.
WARNING!
Always shut off the motor and allow all moving
parts to come to a complete stop before removing any
guards or covers. Do NOT operate with any guards or
covers removed.
WARNING!
Always shut off the motor to stop the blade
whenever the Edger is not in use. Failure to do so may
result in serious injury.
An Emergency Stop is located on the front panel of the Edger control box. Press the
Emergency Stop to shut down the motor. Before operating the Edger again, turn the
E-Stop switch clockwise and release.
FIG. 3-8
IE0029
Feed Reverse Handle/
Anti-kickback Lever
Anti-Kickback Lever/Feed
Reverse Handle
