Maintenance
Replacing the blade teeth
4
4-3
IE
doc122719
Maintenance
both trough the lower hole in the replacement tool and the hole in the blade tooth.
Remove the blade tooth by moving the replacement tool handle upwards.
To replace the blade tooth perform the following steps:
Install the new blade tooth to the blade teeth replacement tool. Secure the blade
tooth to the replacement tool with the locking pin.
Put the replacement tool to the blade where the blade tooth is to be installed.
Move the replacement tool downwards to install the new blade tooth in place.
Remove the locking pin from the replacement tool when done. Remove the
replacement tool from the blade.
Repeat the procedure with the remaining blade teeth.
Use the rod to lower the idle roller when done.
Close the rear top blade guard. Secure the guard with the existing bolts.
FIG. 4-2
Locking Pin
Blade Tooth
Blade
Blade Teeth Replace-
ment Tool
