SAWMILL ALIGNMENT
Aligning the Blade Guides
5
5-21
doc111517
SAWMILL ALIGNMENT
See Figure 5-20.
4.
Adjusting the outside two rollers (furthest from the arm motor) inward will cause the flange to move
away from the blade.
5.
Adjusting the two outside rollers outward will cause the flange to move toward the blade.
6.
Adjust until the roller flange is the same distance from the back of the blade in the open and closed
position.
5.11 Aligning the Blade Guides
Each Wood-Mizer sawmill has two blade guide assemblies that help the blade maintain a straight
cut. The two blade guide assemblies are positioned on the cutting head to guide the blade on each
side of the material being cut.
One blade guide assembly is mounted in a stationary position on the drive side of the cutting head.
This assembly is referred to as the "inner" blade guide assembly.
The other blade guide assembly is mounted on the idle side of the cutting head. It is referred to as
the "outer" assembly and is adjustable for various widths of materials to be processed.
FIG. 5-20
Adjustment Nuts
Adjustment Nuts
SM0066
Adjustment Nuts
Adjustment Nuts
Summary of Contents for A/DH5
Page 1: ...Table of Contents Section Page Table of Contents SW 07doc1115171...
Page 2: ......
Page 86: ...1 18 30doc111517...
