32
3.1.3 Network Settings
The Network Setting section allows users to configure both IPv4 values for management access over the network.
WoMaster’ router supports IPv4 and can be managed through either of these address types. Below is the IP Setting
interface for
Bridge Mode
.
The description of the columns is as below:
TERMS
DESCRIPTION
Type
User can select to DHCP or Static IP to activate the function.
DHCP:
Select DHCP to activate DHCP Client Function, no need to assign IP
Address and received IP Address from DHCP Server.
Static IP:
Select Static IP to configure the IP configuration manually
IP Address
Default: 192.168.10.1
Set up the IP address reserved by User network for User device. If DHCP
Client function is enabled, no need to assign an IP address to device as it
will be overwritten by DHCP server and shown here.
Subnet Mask
Default: 255.255.255.0
Assign the subnet mask for the IP address here. If DHCP Client function is
enabled, no needs to assign the subnet mask.
Gateway IP Address
Default: 0.0.0.0.
Assign the gateway for the device here.
DNS 1
Specifies the IP address of the DNS server 1 that used in user network.
DNS 2
Specifies the IP address of the DNS server 2 that used in user network.
