23
1) Install Ethernet cable between PoE ports of WA512G and PSE switch
2) Install Ethernet cable between LAN ports of WA512G and PSE switch whenever proceeding WebGUI
configuration.
2.2.4.2 Wiring the Ground
The chassis grounding screw is located on the bottom side
of the router. For avoiding system damage by noise or
electric shock, establish a direct connection between the
ground screw and the grounding surface prior to
connecting devices.
2.2.5 Mounting the AP
You can mount the AP by attached Din-Rail Clip or Wall-mount by optional wall-mount plate.
2.2.5.1 DIN-Rail Mounting
The EN50022 DIN-Rail plate should be already attached to the back panel of the device screwed tightly. If user
needs to reattach the DIN-Rail attachment plate to the device, make sure the plate is situated towards the top,
as shown by the following figures.
