10
installed <2m height environment.
Indoor Area:
The product (WA512GM Series, WR312/322/212/222/224) is defined as indoor product. Most of the I/O
interface is connected inside the cabinet/box, for example the power terminal block, USB and RJ-45
connectors.
Note of the WR319/329 Series: The RJ-45 Ethernet LAN ports (port 1~8) is only allowed to be installed
within indoor area. Only the RJ-45 Ethernet WAN port (port 9) can be connected to external device
outside the box.
USB:
The attached USB socket is defined for device maintenance purpose only. Do NOT use it for other
purpose, especially for charging the battery by the USB is restricted. If the device is damaged due to
the restricted behavior, this is not included in product warranty range. (WA512G-IP67, WR312/322,
WR316, WR319/329 Series supports USB interface.)
Grounding:
The equipment must be grounded. Ground the device before connecting the Ethernet
cables, RF antenna, antenna cables and power supply. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available.
WLAN Plan
Professional Wireless IT:
If you are installing the equipment in the factory, station, open area…, the
professional Wireless IT Engineer can provide better service for AP location, channel and field plan to
get better performance and coverage.
RF (Radio Frequency) Notice:
Read the Radio output power, receiver sensitivity, antenna gain specification before installing.
The shipped products and antenna comforts to the CE request and allowed to be used in all
European countries. It also comfort to the FCC request and allowed to be used in USA.
When installing external antennas, the Radio Output power and antenna gain value must be
allowed according to the regulations of the country.
When the system is operational with high gain antenna, avoid standing directly in front of it.
Strong RF fields are present when the transmitter is on.
When the system is operational with high gain antenna in short distance, adjust the radio output
lower (still within the regulation of the country). Strong output power plus high gain antenna is
not good installation for short distance transmission.
Metal Limitation:
Install the device in a cabinet or in an operating site with limited access, the metal
cabinet will filter the radio signals, use the extended antenna cable and install the external antenna in
free space helps to get better Radio signal.
Note that You are responsible for undertaking suitable lightning protection. The Field EMD
