35
The description of the columns is as below:
TERMS
DESCRIPTION
DHCP Setting
Select to
Enable
or
Disable
to activate and deactivate DHCP Server function.
IP Address Start
Assign the IP Address Start range.
IP Address End
Assign the IP Address End range.
Subnet Mask
Default: 255.255.255.0
Assign the subnet mask for the IP address here for DHCP Server.
Gateway
Assign the gateway for the router here for DHCP Server.
WIN S1
Enter WINS Server 1 IP address
WIN S2
Enter WINS Server 2 IP address
Primary DNS Server
Enter Primary DNS Server that used in user network.
Secondary DNS Server
Enter Secondary DNS Server that used in user network.
Lease Time
Default: 1440
The maximum length of time for the IP address lease. Enter the Lease time in
minutes. (Lease Time range: 15-44640 minutes)
The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set
user computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When
user turns the computers on, they will automatically load the proper TCP/IP settings provided by the router. If User
manually assigns IP addresses to User computers or devices, make sure the IP addresses are outside of this range or
User may have an IP conflict. After finished configuring, click on
Submit
to activate the configuration.
DHCP Leased Entries
The figure below shows the
DHCP Leased Entries.
It will show the MAC and IP address that was assigned by router.
Click the
Reload
button to refresh the list.
The description of the columns is as below:
TERMS
DESCRIPTION
IP Address
IP address that was assigned by router.
MAC Address
The MAC Address of the network interface that was used to acquire
the lease.
Time to expire(s)
Remains time for the IP address from DHCP Server leased.
