36
3.2 Ethernet Port
Ethernet Port section is used to access the port configuration and rate limit control. It also allows User to view port
status and port trunk information.
3.2.1 Port Status
Port
Status section allows users to see the current status from the Ethernet.
The description of the columns is as below:
TERMS
DESCRIPTION
Link
Display the Ethernet status, whether it is Link Up or Link Down.
Speed/Duplex
Default: N/A
Show the Speed/Duplex for each port, such as 10 full,10 half,100 full,100 half mode
for
Giga Ethernet Port 1~2
Click on
Reload
to update the information.
3.2.2 Ethernet Setting
Use this page to configure the Ethernet setting.
The description of the Ethernet Setting page is as below:
TERMS
DESCRIPTION
State
Enable or disable the port.
Speed/Duplex
Default: Auto / Auto-Negotiation
Configure the Speed/Duplex of the port Ethernet 1. Users can set the bandwidth of
each port as Auto-negotiation, 100 full, 100 half, 10 full, 10 half mode.
Click
Submit
to apply the configuration that just made.