69
3.5.2 Outbound Firewall
WoMaster’ router has different types firewall settings, user can enable the setting, configure the rules. The following
section is Outbound Firewall Settings pages where user can configure the Outbound Firewall setting.
TERMS
DESCRIPTION
Source IP Filter
Source IP addresses Filtering from LAN to Internet through the router.
Destination IP Filter
Destination IP addresses Filtering from the LAN to Internet through the router.
Source Port Filtering
Source Ports Filtering from the LAN to Internet through the router.
Destination Port Filtering
Destination Ports Filtering from the LAN to Internet through the router
Src IP Filter
By entries parameter in this table, it can restrict certain types of data packets from the local network to the internet
through the Router. The Source IP Filter will help to filter all of the packets that coming into the router. If the source
IP is on the list, then the packets would be dropped. But if the source IP is not on the list, then the packets can be
received. Select
Enable
to activate
Source IP Filtering
, type the
Local IP Address
and
Comment
to write notes for the
entry. Click Submit to activate the settings. After applied, then user can see the new entry shown in the below table.
The description of the columns is as below:
TERMS
DESCRIPTION
Local IP Address
Display the Source IP address.
Comment
Put any notes for the entry.
Select
Select the table, so user can press
Delete Selected
to delete,
Edit
Click edit to modify the parameters
Click
Refresh
to refresh the table
