33
And below is the IP Setting interface for the
Router Mode w
here it supports with the WAN port on port 2. User can
configure the WAN Settings.
The description of the columns is as below:
TERMS
DESCRIPTION
Type
User can select to DHCP Client or Static IP to activate the function.
DHCP Client:
Select DCHP Client to activate DHCP Client Function, no
need to assign IP Address and received IP Address from DHCP Server.
Static IP:
Select Static IP to configure the IP configuration manually
IP Address
Default: 192.168.1.1
Set up the IP address reserved by User network for User device. If DHCP
Client function is enabled, no need to assign an IP address to device as it
will be overwritten by DHCP server and shown here.
Subnet Mask
Default: 255.255.255.0
Assign the subnet mask for the IP address here. If DHCP Client function is
enabled, no needs to assign the subnet mask.
Gateway IP Address
Default: 0.0.0.0.
Assign the gateway for the device here.
DNS 1
Specifies the IP address of the DNS server 1 that used in user network.
DNS 2
Specifies the IP address of the DNS server 2 that used in user network.
3.1.4 Date and Time
The WoMaster router has a time calibration function based on information from an NTP server or user specified time
and date, allowing functions such as automatic warning emails to include a time and date stamp.