Dual Fuel Range Surface Operation
14
CHARBROILER ASSEMBLY
Follow these steps to disassemble the charbroiler for
cleaning:
1)
Remove the charbroiler grate. Refer to the illustration
below.
2)
Remove the radiant plate. Refer to the illustration
below.
3)
Remove the charbroiler frame.
4)
After cleaning, put the charbroiler frame back in place.
5)
Line up the slots in the front of the radiant plate with
the front angle. The slots should fit over the front angle
and sit flat on the charbroiler frame.
6)
Reinstall the charbroiler grate.
CHARBROILER
GRATE
Charbroiler grate.
Charbroiler radiant plate.
RADIANT
PLATE
FRONT
ANGLE
Infrared Charbroiler
CHARBROILER OPERATION
IMPORTANT NOTE:
The stainless steel cover must be
removed prior to operation of the charbroiler.
•
Turn the control knob counterclockwise to the HIGH
setting. You will hear the clicking sound of the igniter
lighting the burner.
•
Preheat charbroiler for about 10 minutes before adding
the food. The ceramic tiles will have an orange-red
glow.
•
To turn the charbroiler off, turn the control knob clock-
wise to the OFF position.
Use care when assembling the charbroiler to avoid con-
tact with the igniter; it is fragile and can chip or break.
