Wohler iVAM1-12G, User Manual, Page: 91 / 125

iVAM1-12G
Page 91
but
it is critical not to disturb the iVAM1-12G or the Web GUI
until the
update process is complete. When it is complete, the iVAM1-12G will restart.
Updating an iVAM1-12G Remotely
Use the following steps to update the iVAM1-12G software:
1. The Software Update files you downloaded earlier must be in the same
computer that is running the Web GUI. Connect to the iVAM1-12G with the
Wohler Web GUI. Navigate to the
System | System Update
menu. Click
within the large blue dotted line rectangle at the right of the screen. A file
selection window will open, as shown in Figure A-9.
Figure A-9 – System Update Menu
2. Click the two update files. One will have a suffix of
.wx
and the other will
have a suffix of
.md5sum
. If you make a mistake and click the wrong file(s),
click the
Cancel Upload
button and try again. When the files have uploaded,
the
System Update
button will be enabled. Click it. If there is a problem
with the files as this point one of the screens shown in Figures A-10 or A-11
will appear. In that case follow the directions on the screen to retry. If there
are no problems, the update will proceed and the screen shown in Figure A-8
will appear.