Wohler iVAM1-12G, User Manual, Page: 89 / 125

iVAM1-12G
Page 89
Updating via the Web GUI using a Flash Drive
Use the following steps to update the iVAM1-12G software:
1. Copy the unzipped Wohler Update Package file(s) from your computer to the
root directory (not inside of a folder) of a USB flash drive. It must be FAT32
file type, and does not need to be empty. Refer to the
Download the
Software section of this chapter for the specifics of download and file transfer
to the USB flash drive.
2. Connect to the iVAM1-12G with the Wohler Web GUI. Navigate to the
System | System Update
menu, as shown in Figure A-5. If the iVAM1-12G
has recently been powered and it contains the Dolby Decoder option, then a
message may appear asking you to wait for a number of seconds so that the
decoder will be operational.
Figure A-5 – System Update Menu
3. Click on the
Refresh
button.
4. Available software update(s) are shown as in Figure A-6. Click the one you
want, followed by clicking the
System Update
button.
Important:
Do not interrupt or remove power to the iVAM1-12G, or remove
the USB drive during the installation process.
Doing so could crash
the iVAM1-12G software.