Wohler iVAM1-12G, User Manual, Page: 74 / 125

iVAM1-12G
Page 74
How do I keep the internal speakers muted and have audio only
on the analog XLR outputs?
When the optional OPT-OUTPUT-ROUTING license is purchased, in the Global
Output Routing
configuration, do not select any
Speaker Headphone
checkboxes for any meter channels as shown below, and then select the desired
meters for Analog XLR. In this way, the internal speakers will always be muted, but
the audio will appear on the Analog XLR outputs (for amplified external speakers).
Make sure that the
Speaker Mix
checkbox selection is unchecked for Analog/XLR.
How do I ensure that the outputs are automatically muted when
the Headphone jack is inserted?
When the optional OPT-OUTPUT-ROUTING license is purchased, in the
Global
Output Routing
configuration, if the
Mute on Headphone Insertion
checkbox is
ON then the outputs get automatically muted when a headphone is inserted into
the Headphone jack.
As shown below, if a headphone is inserted then the output on the Analog XLRs will
be muted, while the audio on AES Pair 1 will remain on.
What are AoIP-Pair 9 and AoIP Pair 10?
AoIP-Pair 9: Selected inputs will be mixed to AoIP transmit channels 17 and 18.
Note that configuration for channels 1 - 16 is not supported. Use a Dante Controller